< / div >
记录:
你好,我的名字是 约翰·乔治。. I’m Senior Director of 解决方案s 和 Professional 服务 with OFS. Today I want to share what’s new in my world that could help you build better fiber to the home (FTTH).
Originally, FTTH deployments were fiber to outdoor ONTs on the side of a house. From t在这里, copper typically was used to reach an indoor residential gateway inside the home. Over time we discovered indoor ONTs are smaller, 和 less expensive. 它们可以部署在家中, co-located with the wi-fi in the center of the building 和 achieve much better wi-fi coverage. 这将降低成本, but t在这里 had to be a way to get the fiber 走进家庭 to that indoor ONT.
用于MDU和公寓楼, 它从纤维发展到建筑, 和 trying to use the existing in-building copper to bring the internet service to each living unit. That proved to be insufficient from a b和width perspective for MDUs. To support 10 gigabit data rates that are being deployed now, it’s desired by service providers to 让纤维进入每个生命单元 公寓大楼的.
I’ll walk you through some innovative technologies we offer, 这有助于解决这些重大问题. 第一种是EZ-Bend布线解决方案. 这是一根直径三毫米的电缆. 它的两端可以有连接器. 它可以简单地钉在任何角落, 和 bends sharply in half with no concern about loss whatsoever. 它有一个2.5 millimeter minimum bend radius – that’s twice as tight as anything else you can get on the market. 别人最好的也不过五毫米.
EZ-Bend 2.5 millimeter bend radius technology is even more necessary as we move to from gigabit, to 10 gigabit. 10 gigabit use longer wavelengths in the transmission system. Longer wavelengths have much higher bend loss than what’s used for the gigabit. So, cable bends in a 10 gigabit transmission is a bigger challenge, but we solve it with the EZ-Bend. You can literally bend it any way without concern for signal loss.
The next technology we offer is the OFS InvisiLight 解决方案. 它用来解决家里或公寓里的问题. 最初,在家里钉电缆是可以接受的. Now, many customers don’t want to see the fiber at all inside the living unit. The OFS InvisiLight 解决方案 is fiber installed inside an apartment, or home that blends into its environment; nearly invisible to anyone looking directly at it. The OFS InvisiLight 解决方案 gets the fiber deep inside to the ONT. We have connectors on both ends of the InvisiLight spool making it easier to deploy a single part number, 覆盖范围可达132英尺, 将光纤引入家庭或MDU生活单元.
We also have a 12 fiber version, 和 a 16 fiber version for MDU hallways. These editions to go down the hallway 和 drop off the single fiber InvisiLight into the living unit.
最后, we have the EZ-Bend单家庭滴液解决方案 that includes drop cabling, 从柱子或基座到家里, 回到家里. This is a double end connectorized assembly that’s toneable orange 和 can be laid out as a temporary drop, 然后再埋葬. What’s beautiful about this is it has the InvisiLight fiber inside the cable, 所以你可以把这个送到楼下去, 直接埋, 或引进, 然后用它把房子包起来, 然后延伸到家里,到达ONT. All that is needed is to strip the jacketing off 和 then what you have is the fiber outside going through the wall to the inside w在这里 we’ve got the InvisiLight deployed to the ONT. Essentially this is a single piece of glass all the way from the curb, 走进家庭, 和连接ONT. Quite simple, one part number, you don’t need a Network Interface Device (NID). 您不需要时间来安装NID. You save dollars if you avoid conduit 和 the NID by going with the EZ-Bend单家庭滴液解决方案 to the home 走进家庭 straight to the ONT.
这就是我的世界里的新事物. 谢谢大家的聆听.